Getting your walls insulated
Insulating the walls helps a home hold on to its heat. The work starts with knowing what kind of walls the house has.
Cavity walls and solid walls
The National Insulation Association represents the insulation industry in the UK. It says a house built before the 1920s is quite likely to have solid walls.
Where a house has cavity walls that nobody has insulated yet, the association says insulation may be injected into the cavity.
Some newer houses were built without a standard cavity. The association calls these non-traditional or system-built homes. For them, it says solid wall insulation may be the best option.
It estimates that a house with solid walls can lose as much as 45% of its heat through them.
For a home in England or Wales, GOV.UK has an online tool that suggests energy improvements. It asks about the insulation in the walls, floor and loft, and then suggests improvements for that home.
Inside or outside the wall
The Insulated Render and Cladding Association (INCA) speaks for the external wall insulation trade. It describes three places insulation can go: on the inside of the walls, in the cavity, or on the outside.
Insulating on the inside takes up some living space, INCA points out. It can also mean moving fitted furniture and redecorating.
Insulation on the outside is covered with a finish. INCA lists render, brick effect, stone chips, stone effect and timber effect among the choices.
INCA says outside insulation suits many houses but not every one. It wants each house assessed before anyone chooses a system.
The survey
For outside insulation, INCA describes a survey before any work begins. The surveyor checks that the wall will hold the fixings, with a pull-out test.
They look at the windows, doors and the overhang of sills and soffits. They list what has to come down and go back up, such as satellite dishes and meter boxes. They also check any coating on the wall that could stop the insulation sticking.
Anything the survey finds is put right before the boards go on.
For cavity walls, the Planning Portal says the building regulations require an insulation material that suits that wall. Some foam materials also need an assessment of the risk of formaldehyde gas.
Choosing an installer
Ofgem calls TrustMark the government endorsed quality scheme for domestic retrofits
, which is work to improve homes people already live in. TrustMark suggests getting three quotes before any work starts.
TrustMark also suggests asking for references and speaking to earlier customers. Its advice is to pick someone it has registered for the particular trade, in this case wall insulation.
TrustMark advises a written contract for every project, with any changes agreed in writing. It suggests paying as each part of the work is finished, not in advance. An installer may still ask for a contribution when the materials are bought.
Building regulations
Cavity wall insulation, according to the Planning Portal, counts as notifiable building work. That means a building notice has to go to a building control body before the work.
The Planning Portal adds that an installer registered with the Cavity Insulation Guarantee Agency will, in most cases, send that notice. It asks building owners to check that someone has sent it.
For a solid wall, the rules start once the work renovates a quarter of an outside wall or more. The Planning Portal says the building regulations would then normally apply, and the wall's insulation would have to meet their standards. Renovation here means a new layer, or a replacement layer, but not decoration.
Where meeting that standard is not technically or practically possible, the Planning Portal says the wall should be brought up to the best standard that pays for itself within 15 years.
GOV.UK says a homeowner can skip applying for approval when the installer belongs to a competent person scheme. GOV.UK lists the schemes approved for cavity, inside and outside wall insulation.
GOV.UK also says the certificates of compliance may be needed later, when the home is sold. Scotland and Northern Ireland run separate building rules, and GOV.UK links to both.
Planning permission
Fitting insulation does not normally need planning permission, the Planning Portal says, as long as it leaves the outside unchanged.
Outside insulation is a kind of cladding, a material put on the outer walls to insulate them, protect them or change how they look.
In a conservation area, a National Park, an Area of Outstanding Natural Beauty or the Broads, cladding the outside of a house with stone, render, timber, plastic or tiles needs planning permission first.
Elsewhere, the Planning Portal says cladding can go ahead without an application, as long as the materials look similar to those the house was built with.
For a listed building, the Planning Portal says any significant work needs listed building consent, whether it is indoors or out.
INCA adds that planning permission is needed where the extra thickness would reach onto someone else's land, a public path or a road.
These planning rules are England's. The Planning Portal says Welsh policy may be different.
Guarantees
A government guide covers cavity wall insulation fitted under the Green Deal or the Energy Company Obligation. It says the guarantee should have been handed over when the insulation was fitted.
Where a homeowner has concerns later, the guide says to go to the installer first. If the installer has gone out of business or not resolved them, the guarantee provider comes next.
For outside insulation, INCA says most system designers can give a warranty of 25 years or more.
Help with the cost
The Energy Company Obligation scheme can help some households with insulation, through their energy supplier or local council. GOV.UK says it closes on 31 December 2026.
Homeowners who claim certain benefits might be eligible if their home has an energy efficiency rating of D, E, F or G. GOV.UK lists the benefits and the rules for tenants.
In England, the Warm Homes: Local Grant can pay for wall insulation where the local council has funding. GOV.UK says the home must be privately owned and have a rating of D to G. It is for people on a low income, getting certain benefits or living in certain postcode areas.
GOV.UK says installers or agents might contact a household directly about the Energy Company Obligation. Anyone unsure whether an offer is genuine can check with their local council or the energy supplier the caller names.
Useful links
- Find ways to save energy in your home (GOV.UK)
- Find an energy certificate (GOV.UK)
- Building regulations for cavity wall insulation (Planning Portal)
- Building regulations for solid wall insulation (Planning Portal)
- Planning permission for work to outside walls (Planning Portal)
- Building regulations approval (GOV.UK)
- Competent person schemes, including wall insulation (GOV.UK)
- Help from your energy supplier: the Energy Company Obligation (GOV.UK)
- Warm Homes: Local Grant (GOV.UK)
- Cavity wall insulation: consumer guide (GOV.UK)
- Finding a registered tradesperson (TrustMark)
- Understanding insulation (National Insulation Association)
- External wall insulation: a guide for homeowners (INCA)
Photo: Panamitsu, CC BY-SA 4.0, via Wikimedia Commons (resized)